Repair all types of roofs with EPDM roof coatings

The importance of roof coatings can definitely not be ignored. Consequently the awareness of different type roof coatings among the roofing contractors and the building residents is very necessary. Therefore get yourself well aware of what type of coating you need and the type of roof you have so that you are able to apply the roof coating which is best for your roof.
Most of the older mobile homes and RV’s around usually have metal roofs, most often aluminum. In order to keep this type of roof in good condition, again it is usually only required that you inspect it regularly and keep it clean. For most metal roofs, it’s okay to clean it twice a year using an automotive wash and wax cleaner.

EPDM rubber has a lengthy proven track record; it has been in use for more than 40 years in diverse conditions. Outfitting your roof with quality materials is an investment, which will pay off in the future because you will not have to spend as much money on roof repair or on replacing your roof sooner that you would wish to. Flexible and versatile, EPDM rubber is a material with much strength, which you can rely on to keep your family safe and dry.

Liquid Rubber for Coating Plywood

Liquid Rubber Coatings has been used directly over plywood to make a finished roof in situations where expediency and minimal cost were the primary considerations. Although this procedure results in a weaker roof structure, water-tightness can be achieved if the application is performed carefully. The joint between sheets should be positioned directly over a roof truss and securely fastened to prevent warping. Next, to seal the pores, coat plywood with oil based primer. Allow an overnight cure. Seal the joint by bridging it with a 6" wide polyester fabric strip. Apply a light coat of EPDM rubber over the joint, lay fabric into wet rubber and smooth out wrinkles. Complete job by applying a liberal coat of Liquid Rubber over entire roof surface, being especially careful to completely cover the fabric over the joint without skips or pinholes. Using an oil base primer on the wood considerably improves the appearance of a one-coat application of Liquid Rubber.

Liquid Rubber is excellent for Wood Surfaces Repair Product; Liquid Rubber can be applied to wood. We recommend first applying a primer coat using an oil base primer and then the Liquid Rubber after the primer has dried. Liquid Rubber can be colored using "universal" colorants available at any paint store. You can add up to one cup per gallon of paint thinner for easier handling when going over wood. Liquid Rubber is slippery when there is only a fine mist of water on its surface. Silicone and oil-based materials are considered unstable and should be avoided.

One stop solution for your all roof repair needs

Anyone who has ever had to undergo roof repair knows how stressful that can be. Normally, it involves calling in professionals and having them use bulky materials for repairs that only add extra weight to your roof. Liquid EPDM can be applied by almost anyone and goes on in one smooth and easy coat so your roof is not bearing any excess weight.

Not only will liquid EPDM negate the need for professional repairs, because it can be applied in one coat, it also helps you to avoid the cost of applying multiple layers or using a primer. Again, this cuts down the cost of repairing a roof leak considerably. And the unique composition of liquid EPDM is not only watertight, but will reduce both rain noise and heat build-up to keep you cooler and more comfortable.

Liquid EPDM has been proven to outlast almost any other roofing substance. Acrylics, urethanes and other elastomers just don’t measure up. Nothing else provides the peace of mind and cost effectiveness of liquid EPDM. It’s the one stop solution for all roof repair needs, from industrial to residential and on surfaces ranging from concrete to metal.

You want a dependable roof over your head, so don’t waste your time with messy and costly repairs. Use liquid EPDM and get it done right the first time with a secure seal that will last for years to come.

Energy Guard Elastomeric Roof Coatings

Energy Guard™ Elastomeric Roof Coating is a high solids, acrylic elastomeric coating for all types of roofs.

BASIC USES
Built Up Roofing (BUR), Concrete Roofs, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing and Wood.

ADVANTAGES
• Provides a seamless, durable membrane.
• Superior adhesion to various substrates.
• Contains fungicides and mildewcides.
• Excellent UV protection for polyurethane foam.
• Heat reflective coating helps reduce cooling costs.
• Reflects the sun's UV-rays and prevents premature degradation.
• Prevents premature roof failure by controlling thermal cycling.
• Easy to use, non-toxic and VOC compliant water based coating.

INSTALLATION
• All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
• Any existing coating must be checked for good adhesion.
• Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
• Energy Guard & trade; Elastomeric Roof Coating is ready to use. Thinning is not recommended.
• Containers should not be left open for extended periods of time.
• Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
• Spray: Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip.
• Brush: Good quality synthetic bristle brush.
• Roller: Short nap roller.
• Clean Up: Water

AVAILABILITY AND COST
EnergyGuard™ Elastomeric Roof Coating is available directly from EPDM Coatings like liquid rubber and liquid epdm. Pricing information can be obtained from an EPDM Coatings Representatives.

WARRANTY
On pre-approved, qualified applications, using approved applicators, a 10 year warranty is available. Contact us for complete warranty information.

MAINTENANCE
Periodic maintenance of Energy Guard Roof Restoration System ensures extended service life and maintains reflectivity.

Caution: EnergyGuard™ Elastomeric Roof Coatings is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Product must be completely dry before exposing to water or foot traffic. Keep Lexis containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.

An elastomeric coatings are roofing applied in a viscous state. It has elastic properties, and can stretch in the summer time heat and then return to their original shape without damage.

Elastomeric coatings usually contain polymeric materials, such as acrylic, and a white pigment, such as titanium dioxide, to make them opaque and reflective. An elastomeric coating is applied thicker than paint.

An elastomeric coating can be used on virtually any substrate including asphalt built-up roofing, concrete roofing, metal roofing, modified bitumen roofing, polyurethane foam roofing and single ply roofing.

Appropriate season for Roof Repair is ahead

As the season is changing and this would be the best time to repair their roof leaks. Summer is considered to be the appropriate season for this repair projects because of the sunny days and low showers & snow. This is the time to identify the source of leaks on their roofs. Then we need to put attention in selecting the appropriate roof coatings material to be used on our roof surfaces. So EPDM Coatings LLC (http://www.epdmcoatings.com & http://www.buyliquidroof.com ) needs to turn the homeowners’ to this crucial project.

Many Coatings are available in market but EPDM Coatings LLC. as having the good record in roof coatings suggest their customers to go for elastomeric coatings i.e. EPDM Coatings, Liquid Roof Coatings and Liquid Rubber because epdm has a track record of excellent performance since long. It has strong weather resistance and flexibility in terms of elongation and contract affected by severe changes in weather. It gives UV protection and lowers your bills due to the temperature control. Liquid EPDM is excellent for both new construction and roof replacement.

Home Prevention

Owing house always give pleasure and comes with several advantages. Aside from this wonderful feeling of having a house you don’t need to worry about paying the rent and you are free to do as you please with it. Well it is very important to main the original look of your house, this will require your time and a bit of money. A lot of beautiful homes have been lost after incurring irreparable damage due to neglect. The more common forms of time-related problems are issues with the roof, plumbing and cracks in the walls. There usually come out roof leaks and wall cracks, due to storms, earth quacks, rain etc. For preventing from these roof leaks you need to examine your roof after every season. If you find any type of crack or leak you can use roof repairing products like liquid roof and liquid rubber. You can use a single coat of liquid rubber through spray, brush or roller and it’s a water proof membrane that is most effective for the rainy seasons. It will retain walls, planter boxes, between slab, tanking & foundation protection. The first step in repairing cracks in walls of plaster is clearing them up and making sure dust and loose chunks of plaster are cleaned out. Then you can use any wall cracks repairing product. So this type of small repair can make your house stand long and will not result to a BIG maintenance.