Epdm Is Relatively Inexpensive

EPDM Coatings LLC is a specialized roof coatings company. It has a research and development phase to design appropriate rubber roof coatings which best suits to your roof surrounding environment and roof conditions. When used in most industrial and commercial buildings, liquid roof coating offers large energy cost savings, preservation of the roof, and significant abatement in your replacement expenses.

Liquid Roof has had a long history of superior performance in hoses, molded products, tires and roofing membranes. For example, the radiator hoses in our cars and the gaskets on our freezer doors are made of liquid EPDM rubber and show the broad temperature range the product can handle. EPDM Roofing Membranes also have more than 30 years of successful history. EPDM is relatively inexpensive, simple to install, and fairly clean to work with when compared to conventional materials. There are not the strong odors and fumes either. The product is very stable and the resulting characteristics of Liquid EPDM Roof such as flexibility, weather ability and chemical resistance are determined by it. Liquid Roof therefore, can be described as a new form of an old and well-established rubber polymer. Now you can take advantage of the same benefits to weather-tight your leaks. Liquid Roof forms a 100% seamless layer.

Being liquid roof applied, these coatings are highly versatile. With traditional resurfacing materials such as felt, it can be difficult to achieve a 100% waterproof surface especially in areas where detailing is difficult. Protrusions such as pipes and surface-mounted roof lights cannot be easily detailed by these materials alone. By contrast, liquid waterproofing can be applied anywhere where one can reach - providing total, fully adhered and seamless protection. A long-term solution to the problem of water ingress, liquid roof coatings are highly durable and long lasting, offering up to 25 years' protection. The systems avoid the use of heat or flames and use specialist cold applied liquid resins of various types.

Liquid Rubber for Coating Plywood

Liquid Rubber Coatings has been used directly over plywood to make a finished roof in situations where expediency and minimal cost were the primary considerations. Although this procedure results in a weaker roof structure, water-tightness can be achieved if the application is performed carefully. The joint between sheets should be positioned directly over a roof truss and securely fastened to prevent warping. Next, to seal the pores, coat plywood with oil based primer. Allow an overnight cure. Seal the joint by bridging it with a 6" wide polyester fabric strip. Apply a light coat of EPDM rubber over the joint, lay fabric into wet rubber and smooth out wrinkles. Complete job by applying a liberal coat of Liquid Rubber over entire roof surface, being especially careful to completely cover the fabric over the joint without skips or pinholes. Using an oil base primer on the wood considerably improves the appearance of a one-coat application of Liquid Rubber.

Liquid Rubber is excellent for Wood Surfaces Repair Product; Liquid Rubber can be applied to wood. We recommend first applying a primer coat using an oil base primer and then the Liquid Rubber after the primer has dried. Liquid Rubber can be colored using "universal" colorants available at any paint store. You can add up to one cup per gallon of paint thinner for easier handling when going over wood. Liquid Rubber is slippery when there is only a fine mist of water on its surface. Silicone and oil-based materials are considered unstable and should be avoided.